Build An Outdoor Dining Bench Upholstered

Author: angel | Categories: Outdoor comments
Rustic Outdoor Dining Bench

Outdoor dining bench – The outdoor dining bench seat is a great way to make sure there is plenty of room for everyone, and is a particularly good way to seat a large number of children. The number of people sitting on each bank can fluctuate with sizes much more convenient than the same configuration children with chairs. Building a dining table and matching upholstered seat give an impression of uniformity, and fabric in the bank can provide a unique look. The construction of the two objects of 2-by-4 studs ensures quality, ease of use and a total budget of low cost.

Building the outdoor dining bench, Place and fix legs and boards leg support in the same way as the table, but on a smaller scale. Cover the table top with a layer of foam. Place the fabric on top of the foam and tucked under the table top. Flip the entire section down and clamp down firmly. Staple every few centimeters while the fabric is stretched. Stuff cotton batting in the tissue above the foam when only one opening on one side. Slowly close the opening, adding more as you continue hitting the clip.

Keep the table top upside down. Place the sets of outdoor dining bench leg on the worktable, evenly spaced and parallel to each other and about 6 inches from each end of the worktable. Pre-drill four holes through each leg support and worktable. Be careful not to pierce the top of the table surface.

READ :   Best Outdoor Hanging Chair

Comments are closed.